Alcoholic beverages containing more than 24% but not more than 70% alcohol
Must be in retail packaging and in containers with a total net quantity per person of 5L. Conditions may vary for international travel.
Must be in retail packaging and in containers with a total net quantity per person of 5L. Conditions may vary for international travel.
Must be securely packaged, for that passenger's own use. Ammunition must not have explosive or incendiary projectiles. Allowances for more than one passenger must not be combined into one or more packages. You must gain approval from your airline before flying.
Must be securely packaged, for that passenger's own use. Allowances for more than one passenger must not be combined into one or more packages. Conditions may vary for international travel. You must gain approval from your airline before flying.
May be equipped with a pyrotechnic trigger mechanism containing less than 200mg net of Division 1.4S, and less than 250mg of compressed gas in Division 2.2. The backpack must be packed in such a manner that it cannot be accidentally activated. The airbags within the backpacks must be fitted with pressure relief valves. You must gain approval from your airline before flying.
It is recommended that balls are deflated, or partially deflated, before flying. Please consult the Airline prior to travel.
Please ensure that all balls are deflated before flying.
Batteries must be securely installed in the relevant device. Please ensure that the device cannot be accidentally activated during transit.
Batteries must be securely installed in the relevant device. Please ensure that the device cannot be accidentally activated during transit.
Batteries must be securely installed in the relevant device. Please ensure that the device cannot be accidentally activated during transit. To be in carried on, the device must not pose a security risk and must not have sharp edges or points capable of injuring someone.
Spare batteries must be individually protected (in original retail packaging, or by otherwise insulating terminals e.g. by taping over exposed terminals or placing each battery in a separate plastic bag or protective pouch) to prevent short circuits.