Safety pilot requirements and responsibilities

A safety pilot is a qualified pilot who helps to maintain safety during flights. Their primary role is to maintain a lookout for other aircraft and hazards.

Flying with a safety pilot does not change who is pilot in command (PIC).

The nominated PIC remains responsible for the flight unless they formally transfer command. Before flying, you must nominate will act as PIC.

Collision avoidance

The safety pilot helps maintain separation from other aircraft. This does not remove the PIC's responsibilities.

When operating with a safety pilot:

  • maintain situational awareness at all times
  • clearly brief and confirm responsibilities before the flight
  • do not assume the other pilot has seen conflicting traffic
  • agree on transfer of control procedures before take-off.

The safety pilot may take control of the aircraft if necessary to maintain safety, including to avoid a collision.

Who can be a safety pilot

To act as a safety pilot on the flight, you must be authorised under Part 61 to operate the aircraft.

A safety pilot does not need to be:

  • a flight instructor
  • a flight examiner
  • an instrument-rated pilot if the flight is conducted under the VFR.

The safety pilot must hold the relevant licence, ratings, endorsements and other authorisations to legally pilot the aircraft for the planned flight.

Simulating flight in instrument meteorological conditions

You must have a safety pilot when you simulate flying in instrument meteorological conditions (IMC). You simulate flying in IMC when you use a hood, goggles or another device to restrict your view outside the aircraft. This prevents the pilot from looking outside the aircraft.

The safety pilot acts as a lookout and helps keep the flight safe while the main pilot operates the aircraft using flight instruments.

As a safety pilot you must:

  • sit in a pilot seat with fully functioning flight controls
  • have a clear view ahead and to both sides of the aircraft
  • have authorisation under Part 61 to legally pilot the aircraft for that flight.

If the aircraft flight manual requires 2 pilots, both pilots must hold the required type rating.

The requirements for safety pilots are in regulation 91.720 of the Civil Aviation Safety Regulations 1998 (CASR) and Part 4 of CASA 62/20 - Conditions on Flight Crew Authorisations (Edition 3) Instrument 2020.

The rules for foreign registered aircraft are different and can be found in Part 129 of the Civil Aviation Safety Regulations.

Using a safety pilot for instrument recency

You can use a simulated IMC flight with a safety pilot to maintain instrument recency requirements.

However, a safety pilot flight does not restore:

  • an expired instrument rating
  • an instrument proficiency check
  • other lapsed qualifications.

Before using a safety pilot flight for recency purposes, ensure you understand which requirement applies to your situation.

Medical certificate conditions

Some medical certificate holders may have a condition requiring them to fly as or with a qualified co-pilot (Class 1), or with a safety pilot (Class 2).

The other pilot's role is to monitor the flight and be ready to take control if you become impaired or incapacitated.

This requirement helps reduce safety risks and may allow some pilots to continue flying when they would not otherwise meet the medical standards.

This is different from the safety pilot requirements for simulated IMC operations.

The co-pilot or safety pilot must be endorsed and current on the aircraft type, appropriately rated for the flight conditions, and must not have a multi-crew flight operations condition on their medical certificate.

The aircraft must have dual controls and side-by-side seating. You must ensure the other pilot is aware of the type of incapacitation you may experience during flight and is prepared to take over the aircraft controls if required.

Further information will be provided to pilots when this condition is placed on their medical certificate. Information is also available in the Designated Aviation Medical Examiner Handbook.

Safety pilots in commercial operations

Some operators choose to fly with a second pilot for operational or risk management reasons, even when the aircraft only requires one pilot.

This is separate from the Part 91 safety pilot role used during simulated IMC flights, and other operator requirements apply.

Good practice when flying with a safety pilot

Before the flight, discuss:

  • who will manage radio communications
  • each pilot’s lookout responsibilities
  • how to transfer control of the aircraft between pilots
  • the standard phraseology you will use
  • the actions each pilot will take during abnormal or emergency situations.

Clear briefing helps reduce misunderstandings and improves situational awareness for both pilots.

Last updated:
18 Nov 2026
Online version available at: https://www.casa.gov.au//operations-safety-and-travel/aviation-safety-and-security-pilots/safety-pilot-requirements-and-responsibilities
Back to top of page